| Place of Origin: | Shanghai, China |
|---|---|
| Brand Name: | Yunyi |
| Certification: | CA |
| Minimum Order Quantity: | 200SQM |
| Price: | Negotiation |
| Packaging Details: | Packing in cartons, pallets |
| Delivery Time: | 5-10 days |
| Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability: | 2000 Square Meter/Square Meters per Week |
| Product Name:: | Office Rubber Flooring | Feature: | Shock Absorbing Rubber Flooring |
|---|---|---|---|
| Size: | 500x500mm, 1000mm*1000mm | Material: | EPDM+SBR |
| Type: | Rubber Flooring Mat | Fire Rating: | B2 B1 |
| High Light: | 30mm Office Rubber Flooring,EPDM Office Rubber Flooring,OEM shock absorbing rubber flooring |
||
Description
Rubber flooring adds deep full color to the strength room floor. Yellow, red, black, and blue virgin rubber colors are most common but many colors are available. It produces less off-gassing odor and a smooth brilliant appearance.
1. 100% pure vinyl wear layer
2. Glass fiber reinforced woven fiberglass inner layer
3. Reinforcement layer
4. Closed cell foaming buffer layer
Specification
Texture of material | High elastic polymer | |||
specification | 50cm*50cm,100cm*100cm | |||
Thickness | 15mm,20mm,25mm,30mm,35mm,40mm,45mm,50mm | |||
tensile strength | 1.65MPa | |||
elongation at break | 150% | |||
Fire rating | B2 B1 | |||
Chemical detection | SGS indoor formaldehyde,National Testing,Fireproof Testing | |||
Wear resistant layer | Double wear layer,Wear resistant layer 1.5mm thickness | |||
Density | Surface layer density:1200, bottom density:800 | |||
Impact absorption | 50% | |||
Anti-slip value | 60 | |||
Bottom | flat bottom & fluted bottom | |||
COLOR DESIGN
| classification | requirements | results | method | test Description | |
| General properties | color fastness to artificial light | 6 minimum blue wool scale ≥3 on grey scale | fulfilled | BS EN ISO105 B02:1992 | Color changes measured in response to changes in lighting |
| residual indentation | nominal thickness ＜2.5mm average value ≤0.2mm | fulfilled | BS EN433:1994 | product indentation measured from loads | |
| flexibility diameter of Mandel 20mm | no cracking ai 20mm | fulfilled | BS EN433:1994 | product measured for damage after bending | |
| stubbed cigarette | method A ≥ rating 3 | fulfilled | BS EN433:1998 | surface changes measured after exposure to stubbed cigarettes [method A]and spontaneous burning [method B] | |
| stubbed cigarette method A, vertical load [5±0.1]N | ≤250mm3 | 199mm3 | ISO 4649:1985 | measurement of product surface abrasion | |
| Hardness | ≥75 shore A | 89 | ISO 7619:1986 | measurement of product hardness | |
| dimensional stability | Tolerance allowed: ±0.4% | -0.02% | BS EN 434:1994 | dimensional changes measured after exposing the product to heat | |
| General properties | Chemical resistance | fulfilled | BS EN423 | External changes were measured after exposing samples to chemical for determining amounts of time and then washing | |
| slip resistance ramp test | R9 | DIN51130:1992 | slip resistance measured by directly walking on differently sloping ramps | ||
| General properties | Smoke density | ≤ds450 | fulfilled | ASTM e662 | the density of smoke resulting from the burning of the product measured |
| surface flammability | ≥0.45w/cm2 | ASTM e648 | radiant heat value required for ignition of the product measured to gauge surface flammability properties |
