| Place of Origin: | Shanghai, China |
|---|---|
| Brand Name: | Yunyi |
| Certification: | CA |
| Minimum Order Quantity: | 200SQM |
| Price: | Negotiation |
| Packaging Details: | Packing in cartons, pallets |
| Delivery Time: | 5-10 days |
| Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability: | 2000 Square Meter/Square Meters per Week |
| Product Name:: | Non Toxic Rubber Flooring | Feature: | Anti Slip |
|---|---|---|---|
| Function: | Shock Absorption Noise Reduction | Size: | 500x500mm,1000mm*1000mm |
| Material: | EPDM+SBR | Type: | Rubber Flooring Mat |
| Fire Rating: | B2 B1 | Certificate: | SGS EN1177 |
| High Light: | 1mx1m non toxic rubber flooring Yunyi,Office 1mx1m non toxic rubber flooring Yunyi,40mm Non Toxic Rubber Flooring 1000mmx1000mm |
||
Description
Rubber flooring usually comes with a subtle matte finish that is very suitable for social areas and athletic installations where the soft hues won’t overwhelm the atmosphere. If you want a greater impression, however, you can brighten the colors by polishing your rubber floor with a water soluble wax emulsion. This will not only give the surface a beautiful shine, but will also make it more durable and stain resistant.
1. 100% pure vinyl wear layer
2. Glass fiber reinforced woven fiberglass inner layer
3. Reinforcement layer
4. Closed cell foaming buffer layer
Specification
Texture of material | High elastic polymer | |||
specification | 50cm*50cm,100cm*100cm | |||
Thickness | 15mm,20mm,25mm,30mm,35mm,40mm,45mm,50mm | |||
tensile strength | 1.65MPa | |||
elongation at break | 150% | |||
Fire rating | B2 B1 | |||
Chemical detection | SGS indoor formaldehyde,National Testing,Fireproof Testing | |||
Wear resistant layer | Double wear layer,Wear resistant layer 1.5mm thickness | |||
Density | Surface layer density:1200, bottom density:800 | |||
Impact absorption | 50% | |||
Anti-slip value | 60 | |||
Bottom | flat bottom & fluted bottom | |||
COLOR DESIGN
| classification | requirements | results | method | test Description | |
| General properties | color fastness to artificial light | 6 minimum blue wool scale ≥3 on grey scale | fulfilled | BS EN ISO105 B02:1992 | Color changes measured in response to changes in lighting |
| residual indentation | nominal thickness ＜2.5mm average value ≤0.2mm | fulfilled | BS EN433:1994 | product indentation measured from loads | |
| flexibility diameter of Mandel 20mm | no cracking ai 20mm | fulfilled | BS EN433:1994 | product measured for damage after bending | |
| stubbed cigarette | method A ≥ rating 3 | fulfilled | BS EN433:1998 | surface changes measured after exposure to stubbed cigarettes [method A]and spontaneous burning [method B] | |
| stubbed cigarette method A, vertical load [5±0.1]N | ≤250mm3 | 199mm3 | ISO 4649:1985 | measurement of product surface abrasion | |
| Hardness | ≥75 shore A | 89 | ISO 7619:1986 | measurement of product hardness | |
| dimensional stability | Tolerance allowed: ±0.4% | -0.02% | BS EN 434:1994 | dimensional changes measured after exposing the product to heat | |
| General properties | Chemical resistance | fulfilled | BS EN423 | External changes were measured after exposing samples to chemical for determining amounts of time and then washing | |
| slip resistance ramp test | R9 | DIN51130:1992 | slip resistance measured by directly walking on differently sloping ramps | ||
| General properties | Smoke density | ≤ds450 | fulfilled | ASTM e662 | the density of smoke resulting from the burning of the product measured |
| surface flammability | ≥0.45w/cm2 | ASTM e648 | radiant heat value required for ignition of the product measured to gauge surface flammability properties |
